Bay Networks ATMSpeed Especificações descarregar pdf (Página 33)

9031561 E1 Conﬁguration Views

3-5

Agent Conﬁguration View

Conﬁguration Protocol

The protocol used to retrieve system conﬁguration. Flash indicates that the

conﬁguration is read from the ﬂash. tftpNoSave indicates that the TFTP

protocol should be used to retrieve the current conﬁguration. The new

conﬁguration is not saved into ﬂash, it is up to the user to save the

conﬁguration if desired. The new conﬁguration will not take effect until the

next system reset. tftpSave indicates that the newly uploaded conﬁguration

will be saved into ﬂash, thus it may be use to permanently update a

conﬁguration. The system is automatically reset.

Conﬁguration Filename

The name of the conﬁguration ﬁle that is sent to the server. The actual boot

protocol used to retrieve the ﬁle is determined by Configuration

Protocol. This parameter may be configured via the network boot protocol.

Conﬁguration Source

An indication of how the system was actually conﬁgured. flashConfig

indicates that the current conﬁguration was obtained via ﬂash.

remoteConfig indicates that the configuration was obtained via the protocol

determined by conﬁgProtocol.

IP Address

The system's IP address. The current operational IP address may be obtained

by the ipAdEntAddr entry in the ipAddrTable. This parameter will take

effect only after a reset is issued.

Subnet Mask

The system's IP subnet mask. The current operational IP subnet mask may be

obtained by the ipAdEntNetMask entry in the ipAddrTable. This

parameter will take effect only after a reset is issued. The parameter is not

saved unless written to ﬂash.

Bcast Address

The system's IP broadcast address. The current operational IP broadcast

address may be obtained by the ipAdEntBcastAddr in the ipAddrTable.

This parameter will take effect only after a reset is issued. This parameter is

not saved unless written to ﬂash.

Default Gateway

The system's default getway IP address. the current operational default

gateway's IP address can be obtained from the ipRoutingTable. This

parameter will take effect only after a reset is issued. This parameter is not

saved unless written to ﬂash.

Conﬁguration Server

The IP address to which the requests for conﬁguration ﬁles are sent. The

protocol used to retrieve the conﬁguration is determined by the

Configuration Protocol object. This parameter may be set dynamically

as established by the ipConfigProtocol object.

IF Conﬁguration Protocol

The protocol used to conﬁgure IP addressing information. Possible values are

flash and bootp.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

Comentários a estes Manuais

Sem comentários

Bay Networks ATMSpeed Especificações Página 33

Comentários a estes Manuais