Bay Networks 5391 Guia de Instalação descarregar pdf (Página 46)

Remote Annex 2000 Hardware Installation Guide

Chapter 2 Installing the Remote Annex 2000

2-12

3 Verify the Remote Annex 2000’s hardware conﬁguration.

At the monitor prompt on the console, type config and press

. The screen display looks like this:

4 Record the Remote Annex 2000’s Ethernet address for future

reference.

At the monitor prompt type addr –d and press . The screen

display should look like this:

Return

monitor:: config

REVISION/CONFIGURATION INFORMATION

ROM Software Rev: 0901

Board ID: 56 Board Type: Remote Annex 2000

CPU Type: 486SXLC2 Ethernet Address: 00-80-2D-00-C6-1E

Memory Size: 4 Meg

Flash Size: 2 Meg Flash ID: 8989

EEPROM Size: 32736

Installed Alternate Interface: ThinNet

ASYNC Config

Number of Ports: 16

Max Port Speed: 115.2 Kbps

Return

monitor:: addr -d

Ethernet address (hex): 00-80-2D-00-18-B6

Internet address: <uninitialized>

Subnet mask: 255.255.0.0

Broadcast address: 0.0.0.0

Preferred Load Host address: <any host>

Preferred Dump Host address: 0.0.0.0

Load/Dump Gateway address: <uninitialized>

Type of IP packet encapsulation: <ethernet>

Load Broadcast: Y

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 135 136

Sem comentários

Bay Networks 5391 Guia de Instalação Página 46